Fanuc Arc Mate Welder Programming Manual
Posted By admin On 05.02.20![Programming Programming](https://www.vogelitalia.it/wp-content/uploads/2017/08/Fanuc-Welding-solutions-robot-based-starting-from-the-ARC-Mate-100iD-low-1900x1900_c.jpg)
2015 f650gs repair manual. Lincoln recommended parameters for.045 wire for spray transfer with 90/10 gas are 375IPM wire and 27 volts. You say you are using argon gas, not 100% it will not weld right on a robot.
Fanuc Programming Manual
![Fanuc Fanuc](https://i.ytimg.com/vi/aUmwrBZwDRQ/hqdefault.jpg)
If you go to Lincoln Electric weld web site they have a MIGMAG Welding guide that has suggested settings for mig welding. Short circuiting settings are 150IPM wire with 19 volts with 75% argon 25% CO2. Also check if these settings are right sounds like you are having a wire feed problem, Bad liner or drive rolls could be worn out.